Diverter Insert

LOCK

o^X

UNLOCK \0

Figure 6.3.1 Typical Diverter System Installed on a Floating Rig

Slip Joint Packer System

SLIP JOINT

ANNULUS

PRESSURE

SLIP JOINT

ANNULUS

PRESSURE

SECTION 6 : WELL CONTROL EQUIPMENT

Typical Operating Pressures

The diverter packer regulator will provide a maximum pressure of 1200 psi on the packer.

For normal pressure use 750 psi.

The manifold pressure regulator provides a maximum pressure of 1650 psi.

For insert packer lock down dogs. Diverter lock down dogs etc.

For normal operation do not exceed 1250 psi.

Recommended pressure settings generally are:

Hydraulic supply pressure 3000 psi Manifold pressure 1250 psi

Diverter packer pressure 750 psi

SECTION 6 : WELL CONTROL EQUIPMENT

Figure 6.3.2 Hydril FSP 28-2000 Diverter/BOP System Hydraulic Schematic

HOSE BUNDLE

Figure 6.3.2 Hydril FSP 28-2000 Diverter/BOP System Hydraulic Schematic

HOSE BUNDLE

Diverter System With Bop

Was this article helpful?

0 0
Serious MLM Mistakes

Serious MLM Mistakes

Discover the Pitfalls and Traps in Network Marketing that You Can Avoid Saving You TONS of Time, Money amp Mistakes. to the exciting follow-up book on Network Marketing. In the first book, we have explored on one of the most important yet least talked about, most overlooked aspect of network marketing or Multi-level Marketing MLM.

Get My Free Ebook


Post a comment