Stack Component Codes

The recommended component codes adopted for designation of subsea blowout preventer stack arrangements use the same nomenclature as surface installations with the addition of remotely operated connectors:

Ch =remotely operated connector used to attach wellhead or preventers to each other (connector should have a minimum working pressure rating equal to the preventer stack working pressure rating).

C^ = low pressure remotely operated connector used to attach the marine riser to the blowout preventer stack.

Example subsea blowout preventer stack arrangements are illustrated in Figs. D.1 through D.8.

FIG D.l ARRANGEMENT CHSACL (2m rated working pressure only.)

Was this article helpful?

0 0
Serious MLM Mistakes

Serious MLM Mistakes

Discover the Pitfalls and Traps in Network Marketing that You Can Avoid Saving You TONS of Time, Money amp Mistakes. to the exciting follow-up book on Network Marketing. In the first book, we have explored on one of the most important yet least talked about, most overlooked aspect of network marketing or Multi-level Marketing MLM.

Get My Free Ebook


Post a comment